Hidro-Water NELVA Руководство - Страница 6

Просмотреть онлайн или скачать pdf Руководство для Системы фильтрации воды Hidro-Water NELVA. Hidro-Water NELVA 17 страниц.

c. Connect the ⅜" tube (Figure 3) to the pressure reducer outlet (Figure
10); to do so, you must remove the blue security clip which is on the out-
let of the pressure reducer and insert the tube fully. Once you have in-
troduced the ⅜" tube, replace the ⅜" plastic clip.
d. You must connect the other end of the ⅜" tube to the inlet of the WA-
TER STOP Antileak system (Figure 8) where it's marked "IN", inserting it
fully. Once inserted, place the ⅜" security clip on it (figure 9).
e. The WATER STOP Antileak system (Figure 8)
must be fixed to the base of the place where
you've decided to put the ultrafiltration system.
To do so, you must use the double-sided tape
that is supplied inside the WATER STOP An-
tileak system box.
f.
Once the WATER STOP Antileak system have been fixed to the chosen
place, you must connect the ⅜" tube to the WATER STOP Antileak out-
let (Figure 8) where it's marked "OUT" fully. Once inserted, place the ⅜"
security clip on it (figure 9).
g. You must connect the other end of the ⅜" tube to
the ultrafiltration system (Figure 1) where it's
marked "ENTRADA" (Inlet). To do so, you must
unscrew the straight nut on the system's inlet.
Then insert the ⅜" tube through the nut and place
a plastic insert (Figure 6) in it. Screw the nut back
on the straight on the ultrafiltration system's inlet.
h. Screw the faucet adapter (figure 7) to the faucet placing the
supplied O-Ring between the adapter and the stud. Insert ⅜"
tube through this adapter's nut and ⅜" sleeve then insert a
⅜" plastic insert (Figure 6) in that end on the tube. Then you
must insert that end in the faucet's adapter and tighten the
nut with the help of a wrench (Our reference: OI-0207-128,
not supplied with the system) or a spanner.
6