Gako PM140 Gebruikershandleiding - Pagina 7

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Gako PM140. Gako PM140 16 pagina's.

Pagina afdrukken

2. Technical Parameters

Model

Width (mm)

Height (mm)

Depth (mm)

Weight (kg)

Table-Top Model

Electrical requirements

Power Consumption (W)

Feed Line

On-Time

Fuse Protection

Revolutions

Time-range

3. Accessories

The gako PM jar 100ml HV is a sterile and disposable

jar composed of polypropylene, and it is specifically de-

signed to be used in the deaeration and mixing processes

of gels, creams, and ointments. Although its capacity is

up to 100 ml, the internal nominal volume is 140 ml. This

extra volume is necessary to allow the particles to move

through the process, and promote its features. This PM

jar presents a movable bottom. After the preparation,

the remaining volume can be eliminated by pushing the

bottom upwards, reducing air contact. It is also com-

patible with gako unguator devices, enabling it to be

used with low-soluble APIs and to prepare suspension

formulas. It, therefore, eliminates the need to transfer

the compound from the unguator jar to the gako PM

jar 100ml HV. Since the PM jars are made of a dispos-

able material, they can also be used as a primary pack-

age to deliver to the patient, reducing the tools to be

cleaned, saving time, and avoiding material loss during

the transfer phase.

gako PM140

205

295

265

17.3

Yes

100 VAC - 230 VAC, 50 / 60 Hz

250

3 x 1.5 mm

%15

2 x 4 AT

2800 rpm

Seconds 10, 20, 30, 40, 50, 60, 90

Minutes 2, 3, 4, 5, 10, 15

The gako PM jar 125ml HV+LV is a disposable jar with a

fixed bottom, designed to be used mainly for the melt-

ing of the suppository preparation, and mixing more

fluid formulas – but it can also be used for other prepa-

rations like creams, ointments, and gels. The capacity

of this PM jar is 125 ml with a 180 ml nominal volume.

When the device is operated in room temperature, the

content can reach up to 45 °C. In case the prescription

requires higher temperature, the external heat can be

applied to the gako PM jar 125ml HV+LV, up to 85 °C by

using a hot water bath.