Gako PM140 Podręcznik użytkownika - Strona 7
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt laboratoryjny Gako PM140. Gako PM140 16 stron.
Drukuj stronę2. Technical Parameters
Model
Width (mm)
Height (mm)
Depth (mm)
Weight (kg)
Table-Top Model
Electrical requirements
Power Consumption (W)
Feed Line
On-Time
Fuse Protection
Revolutions
Time-range
3. Accessories
The gako PM jar 100ml HV is a sterile and disposable
jar composed of polypropylene, and it is specifically de-
signed to be used in the deaeration and mixing processes
of gels, creams, and ointments. Although its capacity is
up to 100 ml, the internal nominal volume is 140 ml. This
extra volume is necessary to allow the particles to move
through the process, and promote its features. This PM
jar presents a movable bottom. After the preparation,
the remaining volume can be eliminated by pushing the
bottom upwards, reducing air contact. It is also com-
patible with gako unguator devices, enabling it to be
used with low-soluble APIs and to prepare suspension
formulas. It, therefore, eliminates the need to transfer
the compound from the unguator jar to the gako PM
jar 100ml HV. Since the PM jars are made of a dispos-
able material, they can also be used as a primary pack-
age to deliver to the patient, reducing the tools to be
cleaned, saving time, and avoiding material loss during
the transfer phase.
gako PM140
205
295
265
17.3
Yes
100 VAC - 230 VAC, 50 / 60 Hz
250
3 x 1.5 mm
2
%15
2 x 4 AT
2800 rpm
Seconds 10, 20, 30, 40, 50, 60, 90
Minutes 2, 3, 4, 5, 10, 15
The gako PM jar 125ml HV+LV is a disposable jar with a
fixed bottom, designed to be used mainly for the melt-
ing of the suppository preparation, and mixing more
fluid formulas – but it can also be used for other prepa-
rations like creams, ointments, and gels. The capacity
of this PM jar is 125 ml with a 180 ml nominal volume.
When the device is operated in room temperature, the
content can reach up to 45 °C. In case the prescription
requires higher temperature, the external heat can be
applied to the gako PM jar 125ml HV+LV, up to 85 °C by
using a hot water bath.
7