DBFX Dancebox Pro Edition Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DBFX Dancebox Pro Edition. DBFX Dancebox Pro Edition 11 pagina's.

Installing Fogger

The dancebox™ can be used with or without a fog machine. The internal

blower provides the pressure necessary to force the fog through the fog

ports and holes on the top of the unit. Because the fog machine has a

container that holds liquid fog juice, the fog machine should only be

placed into the unit immediately prior to use, and only when the

dancebox™ is in normal operating position (on its rubber feet).

 Remove the access panel.

 Place fogger inside the unit.

 Point the fogger away from lighting fixtures.

 Attach DMX timer to fog machine.

 Connect DMX cable from timer into your DMX loop.

 Reattach access panel.

Setup & Takedown

This section describes the proper way to move the dancebox™ and

provides quick lists for setting up and taking down the unit.

Moving the dancebox™ unit around is a cinch with its removable casters.

Go ahead and slide the four included casters onto the caster plates

located at each corner of the access-panel side of the dancebox™. Once

casters are all snapped into place, use the handle on the opposite end

and lift the dancebox™ into the vertical position. The unit can be easily

pushed around in this position.

Caution

Be sure not to lift the dancebox™ unit into its vertical position

with the fog machine inside. Foggers and other unsecured

equipment should be removed prior to moving the unit around in

its vertical position.

Dancebox™ Pro Edition User Manual

May-2012