DBFX Dancebox Pro Edition Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DBFX Dancebox Pro Edition. DBFX Dancebox Pro Edition 11 pagina's.

Initial Setup

Now that you've had a look at everything, you're ready for the initial

setup. The first thing that needs to be done BEFORE installing your

equipment is to determine how you plan to use the dancebox™ unit

(whether in DMX or stand-alone mode).

 Set fixture DMX addresses, or turn on fixture sound/demo mode.

 Install fixtures (see "Installing Fixtures" below).

 Attach removable casters.

 Peel away acrylic protective cover.

The dancebox™ is equipped with standard 3-pin DMX input and output

connectors which allow you to include and program the dancebox™

lighting and fog effects with the rest of your digitally controlled light show.

Before installing the equipment into the dancebox™ unit, you'll need to

set the DMX starting addresses on each piece of equipment. Take into

consideration how many channels are used per device, and the rest of

your DMX equipment that will be part of your DMX universe when setting

the addresses of the equipment that will go into the dancebox™ unit.

To use the dancebox™ in stand-alone mode (i.e. without the use of a DMX

controller), it is recommended to set your lights to the sound-active or

demo modes

. If you plan to use a fog machine with the dancebox™, you

can use a standard timer-controller for the fogger to set an automatic

duration and interval for the fog output. It is recommended to tune these

values for each given venue, or as your needs require.

To install your equipment into the dancebox™ unit:

1 See your equipment manufacture's respective user manuals to determine how to set the fixtures to

use the sound-active or demo modes.

Dancebox™ Pro Edition User Manual

May-2012