Activinsights GENEActiv Gebruiksaanwijzing - Pagina 7

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Activinsights GENEActiv. Activinsights GENEActiv 20 pagina's.

b) LED Signals

When not recording, the battery charge level can be checked by pressing the button on the device.

See diagram below for LED indicators.

A green flash indicates that the device is OK to go into storage if it is no longer in use. A red flash or

no flash at all means that the device should be charged (this function is not available if a device has

been configured to record).

To ensure that a device is fully charged, it must be left in the cradle for a full 3 hours before

deployment. To check the battery level, connect the device to the software. It should show at least a

90% battery level before deploying.

Green Flashing = check battery

Constant Red = communicating

level in software (after 3 hours charge)

Flashing Red = charging

Long Flash (in button start mode) = recording started

Long Flash (in button start mode) = recording stopped

Short Flash (when unconfigured) = battery good for storage

Short Flash (when unconfigured) = battery needs charging