Activinsights GENEActiv Інструкція з використання Посібник з використання - Сторінка 7
Переглянути онлайн або завантажити pdf Інструкція з використання Посібник з використання для Фітнес-обладнання Activinsights GENEActiv. Activinsights GENEActiv 20 сторінок.
Друкувати сторінку
b) LED Signals
When not recording, the battery charge level can be checked by pressing the button on the device.
See diagram below for LED indicators.
A green flash indicates that the device is OK to go into storage if it is no longer in use. A red flash or
no flash at all means that the device should be charged (this function is not available if a device has
been configured to record).
To ensure that a device is fully charged, it must be left in the cradle for a full 3 hours before
deployment. To check the battery level, connect the device to the software. It should show at least a
90% battery level before deploying.
Green Flashing = check battery
Constant Red = communicating
level in software (after 3 hours charge)
Flashing Red = charging
Long Flash (in button start mode) = recording started
Long Flash (in button start mode) = recording stopped
Short Flash (when unconfigured) = battery good for storage
Short Flash (when unconfigured) = battery needs charging
7