Activinsights GENEActiv Gebruiksaanwijzing - Pagina 10

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Activinsights GENEActiv. Activinsights GENEActiv 20 pagina's.

c) Device Setup

Once the device is connected, you will see the device number(s) displayed in the panel at the top of

the screen.

i). Measurement Frequency

Choose your Measurement Frequency (hz). The Maximum Measurement Period will be automatically

calculated. The Maximum Measurement Period will depend on the frequency selected below.

Measurement Frequency

ii). Time Settings

Choose which time setting the device should use. This should be the Local PC Time (unless the PC

time is known to be wrong, in which case the Manual Time setting can be used instead). The Time

Setup dictates the timestamps for the measurement period.

iii). Recording Start Mode

There are three different start modes:

'On Button Press' means that recording will start after the

device is removed from the charger cradle and the button

(hidden under the serial number) on the device is pressed.

In this mode the green light will give a longer flash when the

button is pressed to indicate recording has started.

When this mode is selected, the option to 'Allow Stop &

Restart' will also appear. Leaving this unselected means that

once recording starts, the button becomes inactive so recording

cannot be accidentally interrupted.

The button will not interrupt recording, but instead will be used

as an event marker only, when required.

66.7

85.7

100

Max. Measurement Period (Days)