Activinsights GENEActiv Manual de instruções de utilização - Página 10

Procurar online ou descarregar pdf Manual de instruções de utilização para Ver Activinsights GENEActiv. Activinsights GENEActiv 20 páginas.

Activinsights GENEActiv Manual de instruções de utilização

c) Device Setup

Once the device is connected, you will see the device number(s) displayed in the panel at the top of
the screen.
i). Measurement Frequency
Choose your Measurement Frequency (hz). The Maximum Measurement Period will be automatically
calculated. The Maximum Measurement Period will depend on the frequency selected below.
Measurement Frequency
ii). Time Settings
Choose which time setting the device should use. This should be the Local PC Time (unless the PC
time is known to be wrong, in which case the Manual Time setting can be used instead). The Time
Setup dictates the timestamps for the measurement period.
iii). Recording Start Mode
There are three different start modes:
'On Button Press' means that recording will start after the
device is removed from the charger cradle and the button
(hidden under the serial number) on the device is pressed.
In this mode the green light will give a longer flash when the
button is pressed to indicate recording has started.
When this mode is selected, the option to 'Allow Stop &
Restart' will also appear. Leaving this unselected means that
once recording starts, the button becomes inactive so recording
cannot be accidentally interrupted.
The button will not interrupt recording, but instead will be used
as an event marker only, when required.
10
20
25
30
40
50
60
66.7
75
85.7
100
Max. Measurement Period (Days)
30
28
21
18
15
12
11
10
9
7