9.Solutions C-pan Arm Gebruiksaanwijzing - Pagina 5

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} 9.Solutions C-pan Arm. 9.Solutions C-pan Arm 12 pagina's.

Setup:

Tilt fulcrum back until the lines on top of fulcrum and arm

base line up.

1 Attach the counter weight tube to the front of the C-pan.

2. Insert the lock pin

Attach camera to the camera plate. The camera screw

has a 1/4" thread on one side and 3/8" on the other.

Check the levelling bubble to insure that the C-pan is set

level in all directions.

Place counter weights on tube. Place the weights as needed

(depending on camera weight) to reach a safe operating

balance. Weights can be set at different positions on the

tube to increase or decrease counter balance. It is important

to test the C-Pan arm at its maximum reach with the camera

mounted to set the right weight requirement.

Use the camera plate tilt to position the camera lens in the

middle of the two arms