ADENDORFF CM650 Bedieningshandleiding - Pagina 4

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} ADENDORFF CM650. ADENDORFF CM650 10 pagina's. Concrete mixer

MOVE THE CEMENT MIXER WHILE IT IS RUNNING. BEFORE PERFORMING

SERVICES, MAINTENANCE, OR MOVING THE CEMENT MIXER, TURN OFF

THE GAS ENGINE (PART#45) AND DISCONNECT THE SPARK PLUGWIRE TO

PREVENT ACCIDENTAL STARTING.

2. PRIOR TO USING THE CEMENT MIXER, MAKE SURE YOU READ

AND COMPLETELY UNDERSTAND THIS INSTRUCTION MANUAL AND

THE GAS ENGINE MANUFACTURER'S INSTRUCTION MANUAL.

3. USE COMMON SENSE WHEN HANDLING GASOLINE. Transport fuel only in

approved safety containers. Do not refuel the Engine with the Engine running or while it is

hot. Do not smoke when refueling the Engine. Wipe up any fuel spills on the Engine. Do not

operate the Cement Miser if there is evidence of a fuel leak. Do not operate the Cement Mixer

in or around other flammable or explosive liquids or diesel. Do not operate the Cement Mixer

in a poorly ventilated or enclosed area.

4. KEEP ALL GUARDS IN PLACE AND IN PROPER WORKING CONDITION.

5. NEVER STICK YOUR HANDS AND/OR TOOLS INTO THE DRUM ASSEMBLY

(PART#4) WHILE THE CEMENT MIXER IS IN OPERATION.

6. AVOID CONTACT WITH A HOT ENGINE AND ITS EXHAUST SYSTEM.

Allow the Engine to cool before performing any services or maintenance.

7. KEEP A SAFE CLEARANCE AROUND THE CEMENT MIXER. Keep all people

(except the operator) a minimum of six feet from the Mixer during operation.

8. DO NOT OVERLOAD THE CEMENT MIXER. An overload may damage the

equipment.

UNPACKING

When unpacking, check to make sure all parts listed in the Parts Lists (page8) are included.

Please turn to place of purchase as soon as possible.

OPERATING INSTRUCTIONS

NOTE: All parts below refer to the parts listed and shown on page8 and 9 of this

manual.