Galax Pro 766V-L Gebruiksaanwijzing & veiligheidsinstructies - Pagina 4

Blader online of download pdf Gebruiksaanwijzing & veiligheidsinstructies voor {categorie_naam} Galax Pro 766V-L. Galax Pro 766V-L 15 pagina's. Mini

The term residual current device (RCD) may be replaced by the term ground fault

circuit interrupter (GFCI) or earth leakage circuit breaker (ELCB)

Personal Safety

Stay alert, watch what you are doing and use common sense when operating a

power tool. Do not use a power tool while you are tired or under the influence of

drugs, alcohol or medication. A moment of inattention while operating power tools

may result in serious personal injury.

Use personal protective equipment. Always wear eye protection. Protective

equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protec-

tion used for appropriate conditions will reduce personal injuries.

Prevent unintentional starting. Ensure the switch is in the off-position before

connecting to power source and/or battery pack, picking up or carrying the tool.

Carrying power tools with your finger on the switch or energising power tools that

have the switch on invites accidents.

Remove any adjusting key or wrench before turning the power tool on. A wrench

or a key left attached to a rotating part of the power tool may result in personal

injury.

Do not overreach. Keep proper footing and balance at all times. This enables

better control of the power tool in unexpected situations.

Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing

and gloves away from moving parts. Loose clothes, jewellery or long hair can be

caught in moving parts.

If devices are provided for the connection of dust extraction and collection facili-

ties, ensure these are connected and properly used. Use of dust collection can

reduce dust-related hazards.

Do not force the power tool. Use the correct power tool for your application. The

correct power tool will do the job better and safer at the rate for which it was

designed.

Do not use the power tool if the switch does not turn it on and off. Any power tool

that cannot be controlled with the switch is dangerous and must be repaired.

c.Disconnect the plug from the power source and/or the battery pack from the

power tool before making any adjustments, changing accessories, or storing power

.02.

Mini Circular Saw

Owner's Manual & Safety Instructions