dBTechnologies VIO L1610 Gebruikershandleiding Snel aan de slag - Pagina 3
Blader online of download pdf Gebruikershandleiding Snel aan de slag voor {categorie_naam} dBTechnologies VIO L1610. dBTechnologies VIO L1610 7 pagina's. Symmetrical active 3-way line array with coaxial driver
Pagina afdrukken
- Fasten the two enclosures using the quick-release
pins of the upper VIO L1610.
- Check that all the pins are properly inserted and
locked before other mounting steps.
- Remove the rear pins and put the swing rear
bracket in the final position as shown.
CHECK PERIODICALLY THE INTEGRITY AND THE
FUNCTIONALITY OF THE ENCLOSURE, OF THE
PINS AND OF THE BRACKETS, FOR A SAFE
INSTALLATION. MAKE SURE THAT THE PINS SECURE
PROPERLY THE MODULES AND THAT THEY ARE FULLY
LOCKED.
VIO L1610
www.dbtechnologies.com
- If you need a flown
installation, only one
pin
is
secure the movable
arm. Check that the
arm is inserted in the
bracket. Fasten one of
the two rear pins in
the desired angle, and
let the second one in
the
position
HOLDER".
- If you need a stacked
installation,
mandatory to use both
the pins to secure the
rear bracket. Check
that
the
inserted
bracket. Fasten one of
the two pins in the
desired angle. Lift the
rear
of
enclosure
maximum
allowed by the first pin, and fasten the second pin in
the related "ANGLE LOCK" position. Then release the
upper enclosure and check that the movable arm leans
on the second pin, fastened in the correct position.
3
info@dbtechnologies‐aeb.com
-
Insert the movable arm of rear
bracket of the upper enclosure into
the related housing of the lower one.
- Choose the desired splay angle
between the two enclosures.
required
to
"PIN
it
is
arm
is
in
the
the
upper
to
the
height
420120324Q REV.1.0