Adeneo Embedded i.MX53 Gebruikershandleiding - Pagina 18

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Adeneo Embedded i.MX53. Adeneo Embedded i.MX53 20 pagina's. Quick start board bsp for android gingerbread v4.2

Pagina afdrukken

The adb configuration has changed since Adeneo r4.1. Please look at install/imx-android-

r10.3/doc/i.MX_Android_R10.3_User_Guide.html , section "5.9 How to setup PC (Windows)

to support ADB/RNDIS" for more information.

Following that document, you will need to:

● Update udev rules.

● Create/modify ~/.android/adb_usb.ini.

Please refer to the following page for more information about the adb:

developer.android.com/guide/developing/tools/adb.html

USB mass-storage device

The QSB can be seen as a mass-storage device from a compliant USB host. To achieve this,

you need to:

● Connect the micro-B USB cable of your board to a USB host (e.g. your desktop PC). On

the top left corner, you should see a USB logo.

● Drag the top bar down to the bottom of the screen.

● Click on "USB connected".

● Choose "Turn on USB storage".

● Your host should now detect your QSB device. The contents of the QSB SD Card will be

exported as the mass-storage space.

Using the Atheros Wifi

AR6003 Wifi

● This release supports the Atheros AR6003 Wifi chip by default. To use it, insert the

AR6003 SDIO module into the standard-size SD Card slot of your board. The module

will be detected automatically and you can configure and use the Wifi (Launcher |

Settings | Wireless & Network | Turn on Wifi).

● To disable the Wifi driver, edit src/device/fsl/imx53_loco/BoardConfig.mk:

○ BOARD_WLAN_CHIP_AR6003 :=false

01/29/2012

Adeneo i.MX53 QSB BSP for Android Gingerbread 4.2

http://

Page