Adeneo Embedded i.MX53 Kullanıcı Kılavuzu - Sayfa 18

Anakart Adeneo Embedded i.MX53 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Adeneo Embedded i.MX53 20 sayfaları. Quick start board bsp for android gingerbread v4.2

Sayfayı Yazdır

The adb configuration has changed since Adeneo r4.1. Please look at install/imx-android-

r10.3/doc/i.MX_Android_R10.3_User_Guide.html , section "5.9 How to setup PC (Windows)

to support ADB/RNDIS" for more information.

Following that document, you will need to:

● Update udev rules.

● Create/modify ~/.android/adb_usb.ini.

Please refer to the following page for more information about the adb:

developer.android.com/guide/developing/tools/adb.html

USB mass-storage device

The QSB can be seen as a mass-storage device from a compliant USB host. To achieve this,

you need to:

● Connect the micro-B USB cable of your board to a USB host (e.g. your desktop PC). On

the top left corner, you should see a USB logo.

● Drag the top bar down to the bottom of the screen.

● Click on "USB connected".

● Choose "Turn on USB storage".

● Your host should now detect your QSB device. The contents of the QSB SD Card will be

exported as the mass-storage space.

Using the Atheros Wifi

AR6003 Wifi

● This release supports the Atheros AR6003 Wifi chip by default. To use it, insert the

AR6003 SDIO module into the standard-size SD Card slot of your board. The module

will be detected automatically and you can configure and use the Wifi (Launcher |

Settings | Wireless & Network | Turn on Wifi).

● To disable the Wifi driver, edit src/device/fsl/imx53_loco/BoardConfig.mk:

○ BOARD_WLAN_CHIP_AR6003 :=false

01/29/2012

Adeneo i.MX53 QSB BSP for Android Gingerbread 4.2

http://

Page