Dynapac BG49 Series Montage-instructies - Pagina 4

Blader online of download pdf Montage-instructies voor {categorie_naam} Dynapac BG49 Series. Dynapac BG49 Series 5 pagina's.

- Fasten the cable together using supplied clamps 13 (A clamp each 120 to 130 mm) . Start from the control box

and finish by fastening the cables on the lifting eye .

TEST

ALWAYS HAVE THE THROTTLE AT IDLE WHEN STARTING ENGINE

- Test the machine for proper operation .

Check :

- ON/OFF Switch

- Throttle control idle and full speed .

- Blade angle adjustment .

- Dead man handle .