Autonics FXY Series Producthandleiding - Pagina 2

Blader online of download pdf Producthandleiding voor {categorie_naam} Autonics FXY Series. Autonics FXY Series 4 pagina's. Digital counters/ timers (indicator
Ook voor Autonics FXY Series: Handmatig (6 pagina's), Gebruiksaanwijzing (6 pagina's)

Pagina afdrukken
Autonics FXY Series Producthandleiding
Ordering Information
This is only for reference, the actual product does not support all combinations.
For selecting the specified model, follow the Autonics webstie.
FX
❶
Y
-
I
❶ Display digits
4: 4-digit
6: 6-digit
Product Components
• Product
• Bracket × 2
Dimensions
• Unit: mm, For the detailed drawings, follow the Autonics website.
72
6
■ Bracket
60
Connections
■ FX□Y-I4
INHIBIT
PNP NPN
1
2
3
4
5
6
CP1
CP2
0 VDCᜡ RESET
12 VDCᜡ
50 mA
SOURCE
: 100 - 240 VACᜠ
50 / 60 Hz 3.8 VA
• INHIBIT: In case of timer mode, this terminal is for time hold.
- Voltage input (PNP): connect with 12 VDCᜡ
- No-voltage input (NPN): connect with 0 VDCᜡ
❷
❷ Power supply
2: 24 VACᜠ ± 10 % 50 / 60 Hz,
24 - 48 VDCᜡ ± 10 %
4: 100 - 240 VACᜠ ± 10 % 50 / 60 Hz
• Instruction manual
77
■ Panel cut-out
≥
91
■ FX□Y-I2
INHIBIT
PNP NPN
7
1
2
3
4
5
CP1
CP2
0 VDCᜡ RESET
12 VDCᜡ
50 mA
SOURCE
: 24 VACᜠ 50 / 60 Hz 2.8 VA,
24 - 48 VDCᜡ 1.8 W
Specifications
Model
Display digits
Character size
Max. counting speed
Return time
Min. signal width
Input logic
Error
Unit weight (packaged) ≈ 120 g (≈ 175 g)
Approval
Voltage type
Power supply
Power consumption
External supply power
Memory retention
Insulation resistance
Dielectric strength
Noise immunity
Vibration
Vibration (malfunction)
Shock
+0.7
68
Shock (malfunction)
0
Ambient temperature
Ambient humidity
Protection rating
Mode Setting
6
7
RUN
[RESET] 3 sec
Dot for Decimal Point & Hour / Min / Second
• If there is no RESET key or DIP switch input for 60 sec, it returns to RUN mode.
• [RESET] key: Setting mode ↔ RUN mode
Move the digit when changing the setting value.
■ Decimal point of counter
Parameter
C1-1 Setting mode
Decimal point
C1-2
setting
■ Dot for Hour / Min / Second of timer
Parameter
T1-1 Setting mode
Setting of dot for
T1-2
Hour / Min / Sec
FX4Y-I□
FX6Y-I□
4-digit
6-digit
W 8 × H 14 mm
W 4 × H 8 mm
1 / 30 / 2 k / 5 k cps
≤ 500 ms
INHIBIT, RESET: ≈ 20 ms
Voltage input (PNP) - input impedance: ≤ 10.8 kΩ,
[H]: 5 - 30 VDCᜡ, [L]: 0 - 2 VDCᜡ
No-voltage input (NPN) - short-circuit impedance: ≤ 470 Ω,
short-circuit residual voltage: ≤ 1 VDCᜡ
open-circuit impedance: ≥ 100 kΩ
Repeat / SET / voltage / Temp.: ≤ ± 0.01 % ± 0.05 s
ᜢ ᜧ ᜫ
AC voltage
AC / DC voltage
24 VACᜠ ± 10 % 50 / 60 Hz,
100 - 240 VACᜠ ± 10 % 50 / 60 Hz
24 - 48 VDCᜡ ± 10 %
AC: ≤ 2.8 VA
≤ 3.8 VA
DC: ≤ 1.8 W
≤ 12 VDCᜡ ± 10 % 50 mA
≈ 10 years (non-volatile semiconductor memory type)
≥ 100 MΩ (500 VDCᜡ megger)
Between all terminals and case: 2,000 VACᜠ 50 / 60 Hz for 1 min
± 2 kV square wave noise (pulse
± 500 V square wave noise (pulse
width: 1 ㎲) by the noise simulator
width: 1 ㎲) by the noise simulator
0.75 mm double amplitude at frequency of 10 to 55 Hz (for 1 minute)
in each X, Y, Z direction for 1 hour
0.5 mm double amplitude at frequency of 10 to 55 Hz (for 1 minute) in
each X, Y, Z direction for 10 minute
300 m/s
(≈ 30 G) in each X, Y, Z direction for 3 times
2
100 m/s
(≈ 10 G) in each X, Y, Z direction for 3 times
2
-10 to 55 ℃, storage: -25 to 65 ℃ (no freezing or condensation)
35 to 85 %RH, storage: 35 to 85 %RH (no freezing or condensation)
IP40 (front part, IEC standard)
Dot for Decimal Point &
→
[RESET] 3 sec
Hour / Min / Second
Display
Setting range
-
DP
[FX4Y-I□]
----, ---.-, --.--, -.---
----
[FX6Y-I□]
------, -----.-, ----.--, ---.---, --.----, -.-----
------
Display
Setting range
-
DP
CLR: Not divided with dot 5959: 59 m 59 s
SET: Divided with dot
CLR
→ RUN
Setting example
-
0.59.59: 59 m 59 s