Autonics FXY Series Посібник з експлуатації - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Вимірювальні прилади Autonics FXY Series. Autonics FXY Series 4 сторінки. Digital counters/ timers (indicator
Також для Autonics FXY Series: Посібник (6 сторінок), Інструкція з експлуатації (6 сторінок)
Друкувати сторінку
Ordering Information
This is only for reference, the actual product does not support all combinations.
For selecting the specified model, follow the Autonics webstie.
FX
❶
Y
-
I
❶ Display digits
4: 4-digit
6: 6-digit
Product Components
• Product
• Bracket × 2
Dimensions
• Unit: mm, For the detailed drawings, follow the Autonics website.
72
6
■ Bracket
60
Connections
■ FX□Y-I4
INHIBIT
PNP NPN
1
2
3
4
5
6
CP1
CP2
0 VDCᜡ RESET
12 VDCᜡ
50 mA
SOURCE
: 100 - 240 VACᜠ
50 / 60 Hz 3.8 VA
• INHIBIT: In case of timer mode, this terminal is for time hold.
- Voltage input (PNP): connect with 12 VDCᜡ
- No-voltage input (NPN): connect with 0 VDCᜡ
❷
❷ Power supply
2: 24 VACᜠ ± 10 % 50 / 60 Hz,
24 - 48 VDCᜡ ± 10 %
4: 100 - 240 VACᜠ ± 10 % 50 / 60 Hz
• Instruction manual
77
■ Panel cut-out
≥
91
■ FX□Y-I2
INHIBIT
PNP NPN
7
1
2
3
4
5
CP1
CP2
0 VDCᜡ RESET
12 VDCᜡ
50 mA
SOURCE
: 24 VACᜠ 50 / 60 Hz 2.8 VA,
24 - 48 VDCᜡ 1.8 W
Specifications
Model
Display digits
Character size
Max. counting speed
Return time
Min. signal width
Input logic
Error
Unit weight (packaged) ≈ 120 g (≈ 175 g)
Approval
Voltage type
Power supply
Power consumption
External supply power
Memory retention
Insulation resistance
Dielectric strength
Noise immunity
Vibration
Vibration (malfunction)
Shock
+0.7
68
Shock (malfunction)
0
Ambient temperature
Ambient humidity
Protection rating
Mode Setting
6
7
RUN
[RESET] 3 sec
Dot for Decimal Point & Hour / Min / Second
• If there is no RESET key or DIP switch input for 60 sec, it returns to RUN mode.
• [RESET] key: Setting mode ↔ RUN mode
Move the digit when changing the setting value.
■ Decimal point of counter
Parameter
C1-1 Setting mode
Decimal point
C1-2
setting
■ Dot for Hour / Min / Second of timer
Parameter
T1-1 Setting mode
Setting of dot for
T1-2
Hour / Min / Sec
FX4Y-I□
FX6Y-I□
4-digit
6-digit
W 8 × H 14 mm
W 4 × H 8 mm
1 / 30 / 2 k / 5 k cps
≤ 500 ms
INHIBIT, RESET: ≈ 20 ms
Voltage input (PNP) - input impedance: ≤ 10.8 kΩ,
[H]: 5 - 30 VDCᜡ, [L]: 0 - 2 VDCᜡ
No-voltage input (NPN) - short-circuit impedance: ≤ 470 Ω,
short-circuit residual voltage: ≤ 1 VDCᜡ
open-circuit impedance: ≥ 100 kΩ
Repeat / SET / voltage / Temp.: ≤ ± 0.01 % ± 0.05 s
ᜢ ᜧ ᜫ
AC voltage
AC / DC voltage
24 VACᜠ ± 10 % 50 / 60 Hz,
100 - 240 VACᜠ ± 10 % 50 / 60 Hz
24 - 48 VDCᜡ ± 10 %
AC: ≤ 2.8 VA
≤ 3.8 VA
DC: ≤ 1.8 W
≤ 12 VDCᜡ ± 10 % 50 mA
≈ 10 years (non-volatile semiconductor memory type)
≥ 100 MΩ (500 VDCᜡ megger)
Between all terminals and case: 2,000 VACᜠ 50 / 60 Hz for 1 min
± 2 kV square wave noise (pulse
± 500 V square wave noise (pulse
width: 1 ㎲) by the noise simulator
width: 1 ㎲) by the noise simulator
0.75 mm double amplitude at frequency of 10 to 55 Hz (for 1 minute)
in each X, Y, Z direction for 1 hour
0.5 mm double amplitude at frequency of 10 to 55 Hz (for 1 minute) in
each X, Y, Z direction for 10 minute
300 m/s
(≈ 30 G) in each X, Y, Z direction for 3 times
2
100 m/s
(≈ 10 G) in each X, Y, Z direction for 3 times
2
-10 to 55 ℃, storage: -25 to 65 ℃ (no freezing or condensation)
35 to 85 %RH, storage: 35 to 85 %RH (no freezing or condensation)
IP40 (front part, IEC standard)
Dot for Decimal Point &
→
[RESET] 3 sec
Hour / Min / Second
Display
Setting range
-
DP
[FX4Y-I□]
----, ---.-, --.--, -.---
----
[FX6Y-I□]
------, -----.-, ----.--, ---.---, --.----, -.-----
------
Display
Setting range
-
DP
CLR: Not divided with dot 5959: 59 m 59 s
SET: Divided with dot
CLR
→ RUN
Setting example
-
0.59.59: 59 m 59 s