DYNAPAR HS20 Series Technisch bulletin

Blader online of download pdf Technisch bulletin voor {categorie_naam} DYNAPAR HS20 Series. DYNAPAR HS20 Series 4 pagina's. Sealed hollow shaft

Pagina afdrukken

Dynapar brand Encoder

Series HS20 Sealed Hollow Shaft

Technical Bulletin

DESCRIPTION

The Dynapar brand Series HS20 Sealed

Hollowshaft encoder is designed for easy

installation on motor or machine shafts. Its

hollowshaft design eliminates the need for a

flexible shaft coupling, mounting bracket,

flower pot, or flange adapter. This not only

reduces the installation depth, but also lowers

total cost.

The Series HS20 Sealed Hollowshaft's floating

shaft mount and spring tether minimize

bearing loads and eliminate flexible shaft

couplings to reduce wear and maintenance.

SPECIFICATIONS

STANDARD OPERATING CHARACTERISTICS

Code: Incremental

Resolution: 50 to 2540 PPR (pulses/

revolution)

Accuracy: (worst case any edge to any

other edge) <1024 PPR (metal disk): ±7.5

arc-min.

≥1024 PPR (glass disk): ±2.5 arc-min.

Format: Two channel quadrature (AB) with

optional Index (Z) and complementary

outputs

Phase Sense: A leads B for CCW shaft

rotation viewing the hub clamp end of the

encoder

Quadrature Phasing: 90° ± 22.5°

electrical

Symmetry: 180° ±18° electrical

Index: 180° +18°/-135° electrical (gated

with B low)

Waveforms: Squarewave with rise and fall

times less than 1 microsecond into a load

capacitance of 1000 pf

ELECTRICAL

Input Power:

5 to 26 VDC at 100 mA max., not including

output loads

Outputs:

7273 Open Collector: 30 VDC max., 40 mA

sink max.

7272 Push-Pull and Differential Line

Driver: 40 mA sink or source

Bulletin Number: 702375-0001

Revision Level: J

Date: July 27, 2014

1675 Delany Road

Gurnee, IL 60031-1282

Phone: 847.662.2666

Fax: 847.662.4150

Application Assistance 1.800.234.8731

Frequency Response:

75 kHz min. for extended temperature range)

Electrical Protection: Overvoltage, reverse

voltage and output short circuit protected

Noise Immunity: Tested to EN61326-1 EMC

(Heavy Industrial) for Electro Static Discharge,

Radio Frequency Interference, Electrical Fast

Transients, Conducted and Magnetic Interfer-

ence

Mating Connector:

6 pin, style MS3106A-14S-6S (MCN-N4);

7 pin, style MS3106A-16S-1S (MCN-N5);

10 pin, style MS3106A-18-1S (MCN-N6);

5 pin, style M12: Cable with connector available

8 pin, style M12: Cable with connector available

MECHANICAL

Bearing Life: (at maximum tether loading)

Standard tether: 5x10

Slotted tether: 8x10

Shaft Speed: 6000 RPM max.

Shaft Bore Tolerance: Nominal +0.0002"/

+0.0008" (+0.005/+0.020 mm)

Mating Shaft Requirements:

Runout: ±0.005" (±0.13mm) radial, max.

Endplay: ±0.050" (±1.27 mm) axial, max.

Length: 0.80" (20 mm), minimum

Starting Torque: 3.0 oz-in max.

Moment of Inertia: 5.1 x 10

Weight: 10 oz. max.

ENVIRONMENTAL

Operating Temperature:

Standard: 0 to +70° C

Extended: 0 to +85 °C (consult factory for low

temperature operation to –40 °C)

Storage Temperature: –40 to +85° C

Shock: 50 G's for 11 milliseconds duration

Vibration: 5 to 2000 Hz at 2.5 G's

Humidity: to 98% without condensation

Enclosure Rating: NEMA4/IP65 (dust proof,

washdown)

100 kHz min. (index

revolutions

-4

oz–in–sec