iHelp Alarm iHelp Plus Gebruikershandleiding - Pagina 3
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} iHelp Alarm iHelp Plus. iHelp Alarm iHelp Plus 9 pagina's. Mobile medical alarm system
Pagina afdrukken
Geo-Fencing - Notifies friends/family if you are near and/or step out of your pre-programmed
'safe zone'.
Snap-On Belt Clip (holster) – Won't fall out.
Bluetooth and Wi-Fi ready - For easy communication with accessories.
Complete Accessories - Includes car charging adaptor, neck lanyard, and holster.
Warranty – One (1) year from purchase.
Page 5
Setting up Your iHelp+™
Charge Battery Fully Before Using This Device
Plug the wall adapter into a standard power outlet or power strip, and plug other end into the charging
port.
(Image of plug into power outlet and other end into charging port)
around the button on your pendant, will flash every 5 seconds, indicating that the unit is charging. The
unit is fully charged when the
about 2-3 hours to complete.
When you use your iHelp+™ unit for the first time, you must test your unit to ensure workability. The
large grey button on the front of your iHelp+™ activates the system and automatically dials the
emergency center.
To test, simply press the large
pressing button)
You will hear the unit's voice prompt say, 'your emergency call is now being placed'.
If there is cellular network coverage and GPS signal coverage, and the unit is working properly,
you will then hear, 'your location has been determined'.
The unit will then connect, and you will hear the call center operator greeting you. Simply tell
the operator that you are just testing your system at this time.
NOTE: If you are not in an area with cellular service, the ring around the button on your iHelp+™ unit will
flash
green
every ten (10)
grey
button is pressed. In this case, you should to go to another area with better wireless network coverage
and try testing your unit again. You will need to ensure that you have proper cellular coverage in the area you
plan to use your iHelp+ device most often.
NOTE: In the event the unit is not working properly, but does have cellular network coverage, your
iHelp+™ unit has a self-check system and will announce, 'Unit IS NOT functioning. Please contact
Customer Service.' Please contact your dealer as soon as possible in order to resolve the issue.
We recommend you test your iHelp+™ medical alarm on a weekly basis to ensure the unit is working
blue
lights stay illuminated, and no longer flash.Battery charge takes
grey
button for two (2) seconds and then release.
seconds. Y ou will not hear 'your location has been determined' when the large
(Image of pendant with blue lights illuminated)
properly.
The
blue
charging lights in a ring
(Image of finger