Gale 3070 Gebruikershandleiding - Pagina 3

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Gale 3070. Gale 3070 12 pagina's. 30 series

Pagina afdrukken

For safety reasons please read the following instructions and the enclosed

Important Safety Information carefully before attempting to connect your

subwoofer unit to the mains.

Warning

To reduce the risk of fire or electric shock, do not expose this appliance to

rain or moisture.

Caution

Use of controls or adjustments or performance of procedures other than

those specified may result in hazardous radiation exposure.

Caution

To reduce the risk of electric shock, do not remove cover (or back). There

are no user-serviceable parts inside. Please refer all servicing to a qualified

engineer.

The lightning flash with the arrowhead symbol within an

equilateral triangle is intended to alert the user to the presence

of uninsulated 'dangerous voltage' within the product's

enclosure that may be of sufficient magnitude to constitute a

risk of electric shock to persons.

The exclamation point within an equilateral triangle is intend

ed to alert the user to the presence of important operating and

maintenance

(servicing)

accompanying the appliance.

This product complies with European Low

Voltage (73/23/EEC) and Electromagnetic Compatibility

(89/336/EEC) Directives when used according to this

instruction manual.

AP12401/4 Gale 3070 Owners' Manual (page three)

Important Safety Precautions

Plug Fitting Instructions (UK only)

The cord supplied with this appliance is factory fitted with a 13A mains plug

fitted with a 3A fuse inside.

important that a 3A one is used. If the plug needs to be changed because it

is not suitable for your socket, or becomes damaged, it should be cut off and

an appropriate plug fitted following the wiring instructions below. The plug

must then be disposed of safely, as insertion into a 13A socket is likely to

cause an electrical hazard. Should it be necessary to fit a 3-pin BS mains

plug to the power cord the wires should be fitted

as shown in this diagram.

wires in the mains lead of this appliance may not

correspond

identifying the terminals in your plug. Connect

them as follows:-

•

instructions

the

literature

Note

If a 13 Amp (BS 1363) type of plug is used a 3 Amp or 5 Amp fuse must be

fitted, either in the plug or adaptor, or on the distribution board

Print Pantone Black

for Koda

If it is necessary to change the fuse, it is

The colours of the

with

the

coloured

markings

BLUE

The wire which is coloured BLUE must be

connected to the terminal which is marked

with the letter 'N' or coloured BLACK.

The wire which is coloured BROWN must be

connected to the terminal which is marked

with the letter 'L' or coloured RED

The wire which is coloured GREEN/YELLOW

must be connected to the terminal which is marked with the letter 'E'

coloured GREEN.

GREEN /

YELLOW

FUSE

BROWN

CORD

GRIP