Galileo Quark SoC X1000 Aan de slag handleiding - Pagina 10

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Galileo Quark SoC X1000. Galileo Quark SoC X1000 20 pagina's.

7. Click Install on the next Windows Security window that pops up. And, after a number of

loading-bar-scrolls, the installation should complete and you should be greeted with a

Windows has successfully updated your driver software window.

8. Look back at the Device Manager, under the Ports tree now. There should be an entry for

Galileo (COM #). Remember which COM # your Galileo is assigned, it'll be important for

Arduino sketch uploading and the next step,

Mac OS X Driver Install

Mac has built-in driver support for the Galileo, so this setup should be easy. Follow the steps below

to install the board on your machine:

1. Begin by connecting 5V power to the Galileo.

2. Then connect a

USB socket on your computer.

3. Wait a few seconds while the Galileo boots up. To verify the Galileo has enumerated properly,

open the System Information window (Hold Option > Click the Apple menu in the top left >

Click System Information), and check under the USB tab for a Gadget Serial v2.4 entry.

from the USB Client port on the Galileo to an available

micro-B USB cable

updating

firmware.

Page 10 of 20