AFINIA LABEL L801 Technisch Service Bulletin - Pagina 2
Blader online of download pdf Technisch Service Bulletin voor {categorie_naam} AFINIA LABEL L801. AFINIA LABEL L801 4 pagina's. By vivid
Ook voor AFINIA LABEL L801: Handmatig (6 pagina's)
Pagina afdrukken
Instructions for Removing Service Station & Printhead:
1) Afinia L801:
Remove Printhead:
Using the front display of the Afinia L801 – enter Configuration mode by pushing the
button associated to the Gear.
Enter the Setup menu (option 1) by hitting the return button.
In the Setup menu scroll down to Security (option 4) and hit return.
Next, scroll to Level 2 (option 3) once you enter Level 2 you will be prompted to enter a password. If
you haven't changed your password before then the password should be "123".
Once you have authenticated your password – back out to the Configuration menu and scroll down to
the option Known as Printhead (option 3) and hit the return button.
After entering the Printhead menu scroll down and Eject (option 2) the printhead.
Once the system is done depriming the printhead. Push the latch upright unlocking the printhead –
then lift up and remove the printhead.
Eject Service Station:
Back out to the Configuration menu and scroll down to the option known as Service Station (option 4).
While in the Service Station menu (option 4) scroll down to the Eject (option 2) and hit enter.
As the service station ejects - power off the printer in the front and also on the back of the printer.
Remove the four screws holding the front display panel to the printer. Once this display panel has
been removed you can now access the service station to remove it.
Before removing the service station make sure to disconnect the ribbon cable from the service station.
For additional support call the Vivid Data Support Team at 1-855-848-4332 Option 2!
Installment 161115
2