Galvin Engineering Flowmatic TZ-FLOWSENC24B Installatie van het product - Pagina 6

Blader online of download pdf Installatie van het product voor {categorie_naam} Galvin Engineering Flowmatic TZ-FLOWSENC24B. Galvin Engineering Flowmatic TZ-FLOWSENC24B 10 pagina's. Stainless steel retro fit bluetooth face plate 24v ac, suits enw. sensor

Galvin Engineering Flowmatic TZ-FLOWSENC24B Installatie van het product
Product Installation Guidelines
CONTROLL MODULE PROGRAM MODIFICATION
Required to make changes to the controller
settings :
-
Android device (e.g. smartphone,
tablet).
Installed from PlayStore 'Flowmatic
-
system' software. Locate and
download 'Flowmatic Syatem'
software.
1. Establish Bluetooth connection
− Go to the Bluetooth settings on your device
then scan for devices. Generally, when
scanning the first thing to come up in
available devices will be a Mac address that
looks like this example (AB:EC:69:57:34:02).
This will eventually change to the name of
the device (This can be changed to a custom
name in the app).
− Select this device.
© Galvin Engineering Pty Ltd
Version 2, 8 September 2021, Page 6 of 10
2. Entering the pin
-
The device will ask for a pin, which from factory is
'1234'. Enter this in. (This pin can be changed later
in the app.). Your device is now connected to the
controller, and is ready to be adjusted from the
'Flowmatic system' app.
Version 1, 8 September 2021, Page 6 of 10