Galvin Engineering TCS9C80C Installatie Manuals - Pagina 6

Blader online of download pdf Installatie Manuals voor {categorie_naam} Galvin Engineering TCS9C80C. Galvin Engineering TCS9C80C 7 pagina's. Clinilever cp-bs hospital shower set w/ medi hand shower & 900 ss grab rail

Pagina afdrukken

Product Installation Guidelines

INSTALLATION – WALL TOP ASSEMBLY

IMPORTANT: Galvin Specialised products must be installed in accordance with these installation instructions and

in accordance with AS/NZS 3500, the PCA and your local regulatory requirements. Water and/or electrical supply

conditions must also comply to the applicable national and/or state standards. Failing to comply with these

provisions shall void the product warranty and may affect the performance of the product.

1. Fit spindle assembly

−

Remove handle and flange from cartridge

assembly. Unscrew the ¼ turn ceramic head part

from the threaded sleeve assembly and screw

ceramic cartridge into the valve body by hand,

tighten using a 17mm spanner.

−

Refit threaded sleeve and spindle.

− The ¼ turn ceramic head part MUST be fitted

into the wall body prior to refitting the

threaded sleeve and spindle. DO NOT tighten

cartridge by using the spindle or the threaded

sleeve.

3. Fit handle

−

Ensure the spindle is in the closed position

and firmly press the CliniLever

onto the spindle in the desired orientation.

−

Check operation of CliniLever

They should turn freely for a full ¼ turn.

−

Secure the handle in position using the

supplied washer and stainless steel cap

screw.

2. Fit wall flange

4. Fit water temperature indicator & testing

lever handle

lever handle.

Version 1, 4 November 2022, Page 6 of 7

−

Ensure o-ring is fitted to the bottom of the wall

flange, and then hand-tighten the wall flange

onto the threaded sleeve.

−

Once CliniLever

lever handle is secure; fit the

appropriate water temperature indicator.

−

Once temperature indicator is fitted, check the

operation of the unit and inspect for any leaks.

Document No.: 001.00.10.16

Version 1, 4 November 2022, Page 6 of 7