hikam S5 Handleiding voor eerste lancering - Pagina 4

Blader online of download pdf Handleiding voor eerste lancering voor {categorie_naam} hikam S5. hikam S5 6 pagina's. Smart home wireless ip-camera

Option 2: Launch using „Smart Scan"

If using „AirLink" there is no sound ("Dong..."), try using "SmartScan":

- Follow Preparation Steps 1, 2 and 3.

(see above)

- Configure camera using "SmartScan". The app will guide you through the configuration step by step

(see

pictures 7 through 12)

- Put camera on a surface and put smartphone within 20 to 30cm in front of the camera. If you don't hear a

sound ("boing") within 5 seconds, slightly adjust the angle or position of the smartphone and try again.

(see

picture 11)

Picture 7

Picture 8

Picture 9

Picture 10

Picture 11

Picture 12

- Once the camera has identified the configurations from the OR code, you will hear a signal („Dong ...").

After that please click "Heard" on the App. The camera will connect to the router. Once connected, a

permanent blue LED light will turn on.

- You are asked to name the camera and to enter the initial camera password which is 123.

(see picture 5)

- You will then be asked to enter a new password, consisting of 6-9 digits. Please do NOT start with "0"

(see picture 6)

- You can now follow the live video stream on your smartphone (blue LED light will flash during live video

mode)

Installation Manual

- Hold mounting plate with one hand and screw on white frame counter-clockwise to open / clockwise to

(see pictures 13 and 14).

- For vertical installation, set mark pointing up

(see picture 15).

- The RESET button is located on the back of the camera

(see picture 15).

Picture 13

Picture 14

Picture 15

Support:

http://support.hi-kam.com

For further instructions, video tutorials, software, data sheets, specs, FAQs.

Guaranteed feedback within 24hrs, often within 4hrs.