Coram Showers 800 Snelstarthandleiding - Pagina 3

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Coram Showers 800. Coram Showers 800 8 pagina's. Shower enclosure

Pagina afdrukken
a
2
X
ø 6.5
mm
a: Place the wall channels on the tray ensuring they are vertical and an equal distance back from the front of the tray.
Place masking tape against the wall before marking drill hole positions, this will help prevent the drill bit slipping. Drill 6.5mm
holes, 30mm deep and insert the wall plugs.
b: Apply sealant to the back of the wall channels. c: Fix the wall channels to the walls using 8 x 32mm screws.
3
a
Trim 4x PN40333
760 Model = 268mm
800 Model = 288mm
a: Trim four horizontal fixed panel seals (PN40333) to length: 760 Model = 268mm - 800 Model = 288mm.
b: Fit trimmed seals to top and bottom of both fixed panels. Important: Seal 'flipper' must be on inside of panel.
The seals must be tight up against the metal. Note: Wetting the glass with water will help fit the seals.
b
X
X = Door widths
760 Model = 740mm - 760mm
800 Model = 780mm - 800mm
Inside
Gap
c
32mm
b
PN40333
Inside
PN40333
3