Coram Showers 800 Snelstarthandleiding - Pagina 5

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Coram Showers 800. Coram Showers 800 8 pagina's. Shower enclosure

ø 3

Ensure sides are vertical.

Drill inside wall channels using 3mm drill bit where

shown. Do not drill too deep. Fix using 10mm screws

and screw caps.

PN60511

Fit the door handles to the doors ensuring the plastic washers are fitted each side of the glass.

10mm

Select the vertical seals with the 12mm flipper (PN40095) and trim

to 1717mm.

Fit trimmed seals to both fixed panels, seals must sit tight against

glass clamps (top and bottom).

Important: Seal 'flippers' must be on inside of the enclosure.

Note: Wetting the glass with water will help fit the seals.

9mm

12mm

PN40095

Inside

Trim to

1717mm