Dynojet Power Commander III Installatie-instructies - Pagina 2

Blader online of download pdf Installatie-instructies voor {categorie_naam} Dynojet Power Commander III. Dynojet Power Commander III 3 pagina's. Fuel adjustment
Ook voor Dynojet Power Commander III: Installatie-instructies (4 pagina's), Installatie-instructies (4 pagina's), Installatie-instructies (5 pagina's), Installatie-instructies (5 pagina's), Installatie-instructies (3 pagina's), Installatie-instructies (3 pagina's), Installatie-instructies (4 pagina's), Installatie-instructies (3 pagina's), Installatie-instructies (3 pagina's), Installatie-instructies (5 pagina's), Installatie-instructies (3 pagina's), Installatie-instructies (3 pagina's), Installatie-instructies (3 pagina's), Installatie-instructies (3 pagina's), Installatie-instructies (3 pagina's), Installatie-instructies (3 pagina's), Installatie-instructies (3 pagina's), Installatie-instructies (4 pagina's), Installatie-instructie (5 pagina's), Installatie-instructies (4 pagina's)

Dynojet Power Commander III Installatie-instructies
PCIII
harness
i333-411
www.powercommander.com
Ground wire
Unplug
1
Remove the seats.
2
Prop the fuel tank up.
3
Lay the PCIII in the tail section and
route the PCIII harness towards the
front of the bike (Fig. A).
4
Route the PCIII harness along the left
hand side of the bike.
5
Attach the ground wire from the PCIII
to the negative side of the battery
(Fig. B).
6
Unplug the stock wiring harness
from the lower injectors (Fig. C).
2007 Suzuki GSXR1000 - 2