Dynojet Power Commander III 설치 지침 - 페이지 2

{카테고리_이름} Dynojet Power Commander III에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynojet Power Commander III 3 페이지. Fuel adjustment
Dynojet Power Commander III에 대해서도 마찬가지입니다: 설치 지침 (4 페이지), 설치 지침 (4 페이지), 설치 지침 (5 페이지), 설치 지침 (5 페이지), 설치 지침 (3 페이지), 설치 지침 (3 페이지), 설치 지침 (4 페이지), 설치 지침 (3 페이지), 설치 지침 (3 페이지), 설치 지침 (5 페이지), 설치 지침 (3 페이지), 설치 지침 (3 페이지), 설치 지침 (3 페이지), 설치 지침 (3 페이지), 설치 지침 (3 페이지), 설치 지침 (3 페이지), 설치 지침 (3 페이지), 설치 지침 (4 페이지), 설치 지침 (5 페이지), 설치 지침 (4 페이지)

Dynojet Power Commander III 설치 지침
PCIII
harness
i333-411
www.powercommander.com
Ground wire
Unplug
1
Remove the seats.
2
Prop the fuel tank up.
3
Lay the PCIII in the tail section and
route the PCIII harness towards the
front of the bike (Fig. A).
4
Route the PCIII harness along the left
hand side of the bike.
5
Attach the ground wire from the PCIII
to the negative side of the battery
(Fig. B).
6
Unplug the stock wiring harness
from the lower injectors (Fig. C).
2007 Suzuki GSXR1000 - 2