CORBERO HSG-PF320SX-1 Installatie- en gebruikershandleiding - Pagina 10

Blader online of download pdf Installatie- en gebruikershandleiding voor {categorie_naam} CORBERO HSG-PF320SX-1. CORBERO HSG-PF320SX-1 12 pagina's.

All burners cannot be ignited

Check to make sure that:

●If the ignition pin & wires are workable, check whether the injector was blocked, then use the needle to

clean it if blocked.

●If the ignition pin &wires do not work, it is probably that its interior has fallen off or the pulse has no

discharge.

The ingition pin & wire is not workable

Check to make sure that:

●Whether the ignition pin & wire is normally energized and ignited.

●Place a screwdriver on the ignition pin & wire and test whether it can be ignited(i.e. the ignition ignites

to the screwdriver and the screwdriver ignites to the burner)

●If it can be ignited, press the ignition toward the burner.

●Or you can also put a metal spring on the ignition pin.

The ignition pin & wire can not keep igniting

Check to make sure that:

●For new hob or it has been placed for some time, there will be residual air in the tube, you need to

ventilate the air first.

●Depending on the type of safety device, heating time is different, pressing time need to be

appropriately lengthened.

CORRECT DISPOSAL OF THIS PRODUCT:

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To

prevent possible harm to the environment or human health from uncontrolled the sustainable reuse of material resources.

waste disposal, recycle it responsibly to promote

To return your used device, please use the return and collection systems or contact the retailer where the product

was purchased. They can take this product for environmental safe recycling.