Dea 124RR Instructies en waarschuwingen - Pagina 6

Blader online of download pdf Instructies en waarschuwingen voor {categorie_naam} Dea 124RR. Dea 124RR 11 pagina's. Control board 24v for gate automation operating

Pagina afdrukken

Instructions

The control board is ready to receive instructions

Scroll down the parameters until you visualize P004

Confirm! The control board awaits a further confirmation

Confirm by pressing on the OK key for a few seconds! The procedure starts

Done! The transmitters memory has been deleted

Scroll down the parameters until you visualize "----". The control board awaits

further instructions

Scroll down the parameters until you visualize P005

Confirm! The receiver enters in memorization mode

The flashing light turns on

Press on any key of the transmitter.

Memorization done! The flashing light goes out for 2 seconds. The display

visualizes the number of the transmitter just memorized (es. "r001")

The receiver reverts automatically to memorization mode

The flashing light turns on again

Memorize all necessary transmitters

Wait 10 seconds before quitting the memorization mode

The receiver will now receive all the memorized transmitters

Press simultaneously on key CH1 and CH2, or on the hidden key of a

transmitter already memorized

Scroll down the parameters until you visualize P006

Confirm! You can now select the transmitter

Scroll down the transmitter numbers until you reach the tran-

smitter to be deleted (eg. "r003")

Confirm the deletion by pressing the OK key for a few seconds

OK! The transmitter is deleted

You can now select the parameter

Scroll down the parameters until you visualize "----". The control

board awaits further instructions

Make sure that the receiver is set to receive the type of coding of the transmitter you wish to memorize: visualize and, if

necessary, update parameter n° 8 "type of coding" (see "8.4 Personalization of working parameters ")

Deletion of all transmitters

Memorization of transmitters

How to activate the memorization mode without

Operating on the control board

How to search and delete a transmitter

Operating instructions and warnings

Function

Display

1 2 4 R R