Dea 124RR Instructies en waarschuwingen - Pagina 9

Blader online of download pdf Instructies en waarschuwingen voor {categorie_naam} Dea 124RR. Dea 124RR 11 pagina's. Control board 24v for gate automation operating

Pagina afdrukken

Operating instructions and warnings

9 MAINTENANCE

WARNING Any installation, maintenance or repair operation on the whole system must be carried out

exclusively by qualified personnel. All these operations must be performed only after disconnecting the

power supply, and operating in strict compliance with the electrical standards and regulations in force

in the nation of installation.

WARNING Using spare parts not indicated by DEA System and/or incorrect re-assembly may endanger

people, animals and property, and may also cause malfunctioning of the product: always use parts

provided by DEA System and follow assembly instructions.

10 PRODUCT DISPOSAL

WARNING Disposal of packaging materials (such as plastic, card board, etc.) must be done according

to regulations in force locally. Do not leave plastic bags and polystyrene within the reach of children

Demolition of this product does not cause particular dangers. Whenever the regulations in force in the

country of installation demand it, it is always advisable and necessary to dispose suitably and separately

of each material that make up the product: plastic, ferrous materials, batteries and electric parts.

11 COMPLETE CLOSING ASSEMBLY

Remember that everyone who sells and/ or motorises doors/gates becomes the manufacturer of the

automated door/gate machine, and must therefore prepare and preserve a technical folder containing

the following documents (see Machinery Directives Enclosure V).

• Assembly drawing of the automatic door/gate.

• Electrical connection and control circuit diagram.

• Risk analysis including: a list of the essential safety requirements provided in machine Directive Enclosu-

re I; a list of the risks posed by the door/gate and a description of the implemented solutions

The installer must also:

• Keep these operating instructions and the instructions for all other components in a safe place.

• Prepare the operating instructions and general safety warnings (by filling up these operating instruc-

tions) and hand a copy to the end user.

• Fill in the maintenance handbook and hand a copy to the end user.

• Draw up the EC declaration of conformity and hand a copy to the end user.

• Fill in the complete EC label or plate and apply it to the automated door/gate.

N.B. The technical folder must be kept for inspection by the competent national authorities for at least ten

years starting from the date of the automatic door/gate manufacturing.

WARNING DEA System reminds all users that the selection, positioning and installation of all materials

and devices which make up the complete automation system, must comply with the European Directives

98/37/CE (Machinery Directive), 89/336/CE and subsequent amendments (electromagnetic compati-

bility), 73/23/CE and subsequent amendments (low voltage electrical equipment). In order to ensure a

suitable level of safety, besides complying with local regulations, it is advisable to comply also with the

above mentioned Directives in all non-European countries.

WARNING

Wrong assessment of impact forces may cause serious damage to people, animal and

things. DEA System reminds all personnel that the installer must ascertain that these impact forces,

measured according to EN 12245 prescriptions, are actually below the limits indicated by EN12453

regulation.

WARNING Any external safety device installed in order to conform to the limits set for impact forces

must comply with EN12978.