AFLAMO AV-INS23-01 Gebruikershandleiding - Pagina 5

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AFLAMO AV-INS23-01. AFLAMO AV-INS23-01 19 pagina's. Electric insert fireplace heater

Pagina afdrukken

HEATER button: Turns heater on and off.

NOTE: The heater only works when the

flame effect is on. If the flame effect is off,

the heater will not turn on.

NOTE: To prevent overheating, the heater

blows cool air for 10 seconds before the

HEATER

heater turns on, and after it turns off.

TEMPERATURE button: Turns heater on

and off.

NOTE: Press & Hold the button for 5 seconds,

the temperature setting will switch from ℃ to ℉.

Same way from ℉ to ℃。

TEMP

Remote Control Operation

BUTTON

ON: Enables control panel functions and

remote control. Turns on flame effect.

OFF: Disables control panel functions and

POWER

remote control. Turns off flame effect.

FLAME "-": Makes flame effect dimmer.

NOTE: Flame effect stays on until

power button is turned off. Flame effect

must be on for heater to turn on.

FLAME

FUNCTION

www.aflamo.pl/en/

1. Press once. Indicator lights up.

Fan blows cool air for 10 seconds. Low

heater turns on and blows warm air.

2. Press again. Indicator lights up.

High heater turns on and blows hot air.

3. Press again. Heaters turn off.

The fan blows cool air, then turns off.

P 1. Press once: Indicator lights up.

Temperature goes to 18

2. Press again: until desired setting is

Reached. Digital display shows setting

circles as below:

ACTION & INDICATION

1. Press once. Indicator light turns on.

Power turns on. All functions enabled.

2. Press again. Flame effect turns off.

Power and all functions turn off.

3. Press once. Flame effect gets dimmer.

4. Press again until desired setting is

reached. Flame effect continues to

get dimmer each time button is

pressed.

℃