AFLAMO AV-INS23-01 Посібник користувача - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник користувача для Обігрівач AFLAMO AV-INS23-01. AFLAMO AV-INS23-01 19 сторінок. Electric insert fireplace heater
Друкувати сторінкуHEATER button: Turns heater on and off.
NOTE: The heater only works when the
flame effect is on. If the flame effect is off,
the heater will not turn on.
NOTE: To prevent overheating, the heater
blows cool air for 10 seconds before the
HEATER
heater turns on, and after it turns off.
TEMPERATURE button: Turns heater on
and off.
NOTE: Press & Hold the button for 5 seconds,
the temperature setting will switch from ℃ to ℉.
Same way from ℉ to ℃。
TEMP
Remote Control Operation
BUTTON
ON: Enables control panel functions and
remote control. Turns on flame effect.
OFF: Disables control panel functions and
POWER
remote control. Turns off flame effect.
FLAME "-": Makes flame effect dimmer.
NOTE: Flame effect stays on until
power button is turned off. Flame effect
must be on for heater to turn on.
FLAME
FUNCTION
www.aflamo.pl/en/
1. Press once. Indicator lights up.
Fan blows cool air for 10 seconds. Low
heater turns on and blows warm air.
2. Press again. Indicator lights up.
High heater turns on and blows hot air.
3. Press again. Heaters turn off.
The fan blows cool air, then turns off.
P 1. Press once: Indicator lights up.
Temperature goes to 18
2. Press again: until desired setting is
Reached. Digital display shows setting
circles as below:
ACTION & INDICATION
1. Press once. Indicator light turns on.
Power turns on. All functions enabled.
2. Press again. Flame effect turns off.
Power and all functions turn off.
3. Press once. Flame effect gets dimmer.
4. Press again until desired setting is
reached. Flame effect continues to
get dimmer each time button is
pressed.
℃
5