HIKVISION D0T Gebruikershandleiding - Pagina 10

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} HIKVISION D0T. HIKVISION D0T 17 pagina's. Audio turret camera
Ook voor HIKVISION D0T: Gebruikershandleiding (17 pagina's), Gebruikershandleiding (15 pagina's), Gebruikershandleiding (11 pagina's), Gebruikershandleiding (11 pagina's), Gebruikershandleiding (17 pagina's)

Note:

The supplied screw package contains self-tapping

screws, and expansion bolts.

5. Route the cables through the cable hole, or the side

opening.

6. Install the camera back to the mounting base and

secure it.

Figure 2-10 Install the Camera Back

7. Connect the corresponding cables, such as power

cord, and video cable.

8. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the camera according to the figure below

to get an optimum angle.

2.4 Installation of Type VI Camera

Before you start:

The installation of ceiling mounting and wall mounting

are similar. Following takes ceiling mounting as an

example.

1. Drill the screw holes and cable hole (optional) on

the ceiling.

2. Align the triangle marks then pry the bubble by

anti-clockwise rotating a flat blade screwdriver.

3. Attach the mounting base to the ceiling with PA × 25

screws.

Figure 2-13 Attach the Mounting Base

4. Route the cables through the cable hole, or the side

opening.

5. Connect the corresponding cables.

6. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the camera according to the figure below

to get an optimum angle.

Figure 2-11 3-Aixs Adjustment

Figure 2-12 Pry the Bubble