Gamma Progression ES II Gebruikershandleiding - Pagina 9

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Gamma Progression ES II. Gamma Progression ES II 16 pagina's.

WARNING:

KEEP FINGERS AWAY FROM GRIPPER DRUM WHILE TENSIONING

STRING. PUSH GRIPPER REVERSING SWITCH IN CASE OF EMERGENCY.

STRINGING THE FRAME

Clamping the First Main String

To begin stringing the main strings, thread the two ends of the

string through the two center holes at the appropriate end of the

frame and continue through the opposite center holes. Thread

one end of the string through the adjacent grommet hole and pull

excess by hand.

Secure one of the strings using a string clamp.

Pulling Tension

To pull tension, wrap the free string clockwise around the gripper

drum and position the string between the gripper jaws.

The string must pass over the top half of the gripper before being

placed between the gripper jaws, as the tension on the string

provides the clamping force to the gripper jaws.

Gently pull the string until all slack is removed.

Push the Tension Switch toward the right side of the machine.

The string gripper will rotate and slowly apply tension to the

string. When the set tension has been attained, the gripper will

stop rotating. As the tensioned string stretches, the gripper may

rotate intermittently, maintaining the set tension.

To release the string after clamping, push the tension switch

toward the left side of the machine. If the string gripper does not

release the string, depress and hold the Gripper Reversing

Switch once to release the string.