decina ALEGRA AG1700BTWCNW Installatie- en gebruikershandleiding
Blader online of download pdf Installatie- en gebruikershandleiding voor {categorie_naam} decina ALEGRA AG1700BTWCNW. decina ALEGRA AG1700BTWCNW 4 pagina's. Freestanding back-to-wall contour spa bath
Pagina afdrukkenA L E G R A F R E E S T A N D I N G B A C K - T O - W A L L C O N T O U R S P A B A T H
This manual provides the correct steps and care advice for a safe and long lasting installation.
Manufactured from premium sanitary grade acrylic, Decina's freestanding spa baths are easy to install,
with adjustable self-supporting feet & can be freely located anywhere in your bathroom.
THIS PRODUCT MUST BE INSTALLED BY A QUALIFIED TRADESMAN
READ CAREFULLY
PRIOR TO COMMENCING
INSTALLATION
MAINTENANCE
DECINA USES THE HIGHEST SANITARY GRADE ACRYLIC, HOWEVER NAKED FLAMES, CIGARETTES OR STRONG CHEMICALS
SHOULD BE AVOIDED & REMOVED IMMEDIATELY TO PRESERVE THE HIGH GLOSS ACRYLIC SURFACE:
When filling the bath start with cold water to allow the bath to gradually adapt to the temperature.
!
After using your bath clean with a soft cloth & warm soapy water to clean any oils or soap, to prevent tide marks
!
& preserve the polished surface.
Clean using warm soapy water & only mild liquid detergents. Do not use powders, pastes, creams, chemicals, window
!
cleaning sprays or abrasive cleaners.
Cream cleaners may only be used to remove stubborn marks.
!
Scratches can be removed with a fine polish like Brasso.
!
1 | DECINA INSTALLATION MANUAL
I N S T A L L A T I O N & O W N E R G U I D E
Thank you for purchasing a Decina Alegra Freestanding Spa Bath.
AG1500BTWCNW (12 jets) 1500(L) x 800(W) x 590(H) mm
AG1700BTWCNW (12 jets) 1700(L) x 800(W) x 590(H) mm
PRE-INSTALLATION CHECKS
Unpack & check the item is correct & no damage has occurred during transit.
!
If there are any visible defects DO NOT PROCEED WITH THE INSTALLATION & please contact
!
the place of purchase immediately. ANY CLAIMS FOR DAMAGE WILL NOT BE ACCEPTED
AFTER INSTALLATION.
Protect your spa bath before & during installation, scratches &/or cracks &/or surface
!
damage sustained during or after the installation are not covered by warranty.
Installation must be in accordance with building regulations & local authority requirements.
!
Electrical installation must comply with AS:3000 - Electrical Wiring Rules.
!