Major Manufacturing HIT-66-248 Gebruiksaanwijzing - Pagina 5

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Major Manufacturing HIT-66-248. Major Manufacturing HIT-66-248 7 pagina's. Template for hager series mortise lock

Pagina afdrukken

Install the mortise lock positioning

plate. The plate will fit into the

1-1/4" x 8" faceplate cut out. There

will be a 3/8" diameter pin centered

on the plate. There is no top or

bottom to worry about.

Slide the HIT-66 template guide onto

alignment pin and tighten to door.

Alternate tightening between the top

and bottom clamp. Do not attempt to

tighten one clamp all the way at

once.

With a 3/8" twist drill,

drill the thru bolt

holes on both sides

of the door. These

holes go to the

mortise cavity. Do not

attempt to drill from

one side through to

the other.

PAGE 4