Major Manufacturing HIT-66-248 Руководство по эксплуатации - Страница 5

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Замки Major Manufacturing HIT-66-248. Major Manufacturing HIT-66-248 7 страниц. Template for hager series mortise lock

Печатать страницу

Install the mortise lock positioning

plate. The plate will fit into the

1-1/4" x 8" faceplate cut out. There

will be a 3/8" diameter pin centered

on the plate. There is no top or

bottom to worry about.

Slide the HIT-66 template guide onto

alignment pin and tighten to door.

Alternate tightening between the top

and bottom clamp. Do not attempt to

tighten one clamp all the way at

once.

With a 3/8" twist drill,

drill the thru bolt

holes on both sides

of the door. These

holes go to the

mortise cavity. Do not

attempt to drill from

one side through to

the other.

PAGE 4