Major Manufacturing HIT-66-274 Gebruiksaanwijzing - Pagina 6

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Major Manufacturing HIT-66-274. Major Manufacturing HIT-66-274 10 pagina's. Template for sargent “in” series cylindrical lock

Pagina afdrukken

Slide the HIT-66 clamp

system onto the door

with the "U" shaped

guide over the blue

alignment plug. Tighten

the clamps by alternat-

ing between the top

and bottom clamp. Do

not tighten one clamp

all the way at once.

Start by drilling the

two post holes with a

7/16" twist drill. Drill

half way from both

sides of the door. If

this is a retro fit it is a

good idea to re-drill

these holes if they

are on the door. This

will ensure they are

straight and true.

With a 5/32" twist drill,

drill the holes for

anchor lugs using the

holes located at 3:00

and 9:00 positions.

Drill about 3/16" into a

wood door. On a steel

door you may need to

open the hole into a

notch with the use of

a file prior to installing

the lock.

Major Manufacturing Inc

PAGE 5