GAMMA2 nano Gebruikershandleiding - Pagina 9

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} GAMMA2 nano. GAMMA2 nano 12 pagina's. Automated pet feeder

section 6:

troubleshooting

1) If no time is shown on the LCD Display:

a) Turn on Power Button. It is possible the unit is in the Off Mode.

b) Make sure wall outlet is functioning by plugging in a different

electrical device.

c) Check connection of Micro USB Plug and Universal USB Power Supply. It

is possible the connection has come loose.

d) Change Backup Batteries.

2) If the clock is flashing:

a) The unit has lost power. Resetting user defined CLOCK, MEAL TIME and

MEAL SIZE programming will be necessary.

b) Note: Until unit is reprogrammed, it will revert to the

DEFAULT MEAL SETTINGS.

3) If "Error" indicator is flashing, this indicates the unit did

not completely deliver the full amount of food programmed

for the meal:

a) Turn unit off by using Power Button, empty the Food Hopper.

b) Check for food jamming in the throat of the Base Unit. Note: To avoid

damaging the unit, DO NOT use tools.

c) Check for jamming around food discharge door.

d) Dislodge any food jams. Reminder: Works best with ½" food diameter

food or smaller.

e) Re-assemble, refill with food and turn on unit.

f) Press the MANUAL button on the display to ensure the unit will properly

dispense food. Note: If clock is flashing, unit has lost all power.

Resetting user defined CLOCK, MEAL TIME and MEAL SIZE programming

will be necessary.

4) Error light is flashing, with an overfilled bowl:

a) Unit is not able to dispense based on food being unable to fall from the

Base Unit.

b) Empty the bowl so future meals can dispense properly.

c) If overfilling is consistently happening, the user defined MEAL SIZE

should be reduced.

5) If the "LOW BATTERY" indicator light is lit:

a) Ensure Micro USB Plug is connected to Base Unit and Universal USB

Power Supply is plugged into wall outlet. Make sure no connections

have come loose.

b) Make sure wall outlet is functioning by plugging in a different electrical

device.

c) Refer to the Battery installation instructions and install new batteries.

d) If clock is flashing, unit has lost all power. Resetting user defined CLOCK,

MEAL TIME and MEAL SIZE programming will be necessary.

Replacement parts are available at: www.petmate.com