Centurion D10 Configuratiehandleiding - Pagina 3

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Centurion D10. Centurion D10 13 pagina's. Industrial sliding gate operators
Ook voor Centurion D10: Installatiehandleiding (12 pagina's), Installatiehandleiding (12 pagina's), Snelstarthandleiding (8 pagina's)

Pagina afdrukken

The schedule of Factory Defaults are detailed in the full

installation manual, available for download on

www.centsys.co.za

Icon

Setting limits

Safety

2.1. Collision force

2.2. Collision count

2.3. Alarm output

2.4. LCK input as ESTOP

2.5. External gate

indication status

Autoclose

3.1. Autoclose Status

3.2. Autoclose Timer

3.3. Autoclose Override

3.4. Autoclose advanced

options

Modes of operation

4.1. Operating mode

Run profile

5.1. Positive Close Mode

5.2. Pre-open delay

5.3. Pre-close delay

5.4 Opening speed

5.5. Closing speed

5.6. Ramp-up distance

5.7. Ramp-down distance

5.8. TRG stop distance

5.9. IRB stop distance

5.10.Crawl distance

5.11.Torque limit

Sub-menu

1.1. Setup wizard

2.1.1. Opening collision force

2.1.2. Closing collision force

2.5.1. Indicator output

2.5.2. Closed indication

2.5.3. Part close indication

2.5.4. Closing indication

2.5.5. Part open indication

2.5.6. Opening indication

2.6.7. Open indication

2.5.8. Pedestrian indication

2.5.9. Unknown indication

3.4.1. Autoclose fully open

3.4.2. Autoclose partly open

3.4.3. Autoclose partly closed

4.1.1. Standard Mode

4.1.2. Condominium Mode

4.1.3. Reversing Mode

4.1.4. PLC

4.1.5. Deadman Control Mode

5.1.1. Positive Close Mode Status

5.1.2. Positive Close Mode Force