Green Gorilla ProLine PowerPack X Gebruikershandleiding - Pagina 3
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Green Gorilla ProLine PowerPack X. Green Gorilla ProLine PowerPack X 4 pagina's.
Pagina afdrukken1. Insert the Green Gorilla standard wall charger into a 110 Vac wall outlet.
2. Locate the charging port cover on your PowerPack X. The charging port cover is
located on the right side of the PowerPack as shown in Figure 4.
3. The charging port is protected by a ip open cover. Gently pull up on the tab to
expose the charging port.
4. Firmly insert the wall charger plug into the port.
5. The wall charger indicator light will turn green when the lithium ion cells are fully
charged. Charge time is approximately 3-5 hrs.
6. After fully charging, remove the charger plug from the PowerPack charging port
and push the protective cover back into place.
7. Ensure that the PowerPack X battery level indicator shows green when the unit is
turned on.
IMPORTANT! If the PowerPack fails to turn on after charging, pull back the
protective cover and gently reinsert. A built-in safety interlock system that
prevents usage while charging may have become engaged due to over- insertion
of the protective cover.
PowerPack Usage
Turn PowerPack on by depressing the on/o power button on the top surface of the
PowerPack as shown above ( gure 7).
If fully charged, a green light will display on both the top surface and the center of the
knob. Both the knob indicator light and the power level indicator are synchronized to
indicate power depletion during normal operation. Green = Full Charged, Yellow = Half
Charge, Red = Low Battery ( gures 8 & 9).
During normal operation, the PowerPack will automatically cycle to maintain the
factory pressure set point as necessary. The Power Level Indicator Lights will remain on
to indicate the PowerPack is in pressure sensing mode.
g. 7
3