2M Technology 2MTHWT-HMD-II Beknopte handleiding - Pagina 5
Blader online of download pdf Beknopte handleiding voor {categorie_naam} 2M Technology 2MTHWT-HMD-II. 2M Technology 2MTHWT-HMD-II 17 pagina's. Digital detection module
3.2
Tools Preparations
Antistatic wrist strap or antistatic gloves
Marker
Drill
M8/M6 simple open-end wrench
Phillips screwdriver
Slotted screwdriver
3.3
Installation Steps
NOTE!
Before installing the digital detection module, connect the cables between the
module and a face recognition access control terminal/face recognition terminal by
referring to section "Device Wiring" and sections related to the wiring in the quick
guide of the face recognition access control terminal/face recognition terminal.
1 Wall mount
The figure below shows the process of installing the digital detection module on a
wall when the module is to be used in combination with a face recognition access
control terminal.
Installation mode 1
1. Mount the bracket to the wall.
2. Fix the temperature
measurement module.
www.2MTechnology.net
Digital Detection Module - Quick Guide
4