2M Technology 2MTHWT-HMD-II Skrócona instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Wykrywacz metali 2M Technology 2MTHWT-HMD-II. 2M Technology 2MTHWT-HMD-II 17 stron. Digital detection module

Drukuj stronę

3.2

Tools Preparations

 Antistatic wrist strap or antistatic gloves

 Marker

 Drill

 M8/M6 simple open-end wrench

 Phillips screwdriver

 Slotted screwdriver

3.3

Installation Steps

NOTE!

Before installing the digital detection module, connect the cables between the

module and a face recognition access control terminal/face recognition terminal by

referring to section "Device Wiring" and sections related to the wiring in the quick

guide of the face recognition access control terminal/face recognition terminal.

1 Wall mount

The figure below shows the process of installing the digital detection module on a

wall when the module is to be used in combination with a face recognition access

control terminal.

Installation mode 1

1. Mount the bracket to the wall.

2. Fix the temperature

measurement module.

www.2MTechnology.net

Digital Detection Module - Quick Guide