HIKVISION H1T Series Gebruikershandleiding - Pagina 7

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} HIKVISION H1T Series. HIKVISION H1T Series 14 pagina's. Turbo hd dome camera
Ook voor HIKVISION H1T Series: Gebruikershandleiding (15 pagina's), Gebruikershandleiding (17 pagina's), Gebruikershandleiding (17 pagina's), Gebruikershandleiding (14 pagina's), Gebruikershandleiding (14 pagina's)

3. Disassemble the inclined base by the screw driver.

4. Install the turret camera's mounting base on the

inclined base cover with three PM4 screws.

Figure 2-7 Install Turret Camera's Mounting Base

5. Install the inclined base's body on the ceiling/wall

with four PA4×25 screws, as shown in Figure 2-8.

Figure 2-8 Fix the Inclined Base Body

6. Combine inclined base's cover with its body with

supplied screws.

7. Repeat steps 6 to 9 of the 2.1.1 Ceiling/Wall

Mounting without Junction Box to complete the

installation.

Figure 2-9 Fix the Camera to the Inclined Base

2.2 Installation of Type II Camera

Purpose:

Both wall mounting and ceiling mounting are suitable

for the turret camera. Ceiling mounting will be taken as

an example in this section. You can take steps of ceiling

mounting as the reference, if the wall mounting is

adopted.

Steps:

1. Disassemble the turret camera by rotating the

camera to align the notch to the clip plate, as shown

in the Figure 2-10.

Figure 2-6 The Drill Template