HIKVISION TURBO HD DS-2CE56H0T-IT3F Gebruikershandleiding - Pagina 10
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} HIKVISION TURBO HD DS-2CE56H0T-IT3F. HIKVISION TURBO HD DS-2CE56H0T-IT3F 17 pagina's. Turbo hd bullet & dome camera
Ook voor HIKVISION TURBO HD DS-2CE56H0T-IT3F: Gebruikershandleiding (16 pagina's)
Pagina afdrukken
Figure 2-12 Disassemble the Camera
2. Pry the snap joint anticlockwise to remove the
bubble, and the black liner.
3. Attach the drill template (supplied) to the place
where you want to install the camera, and then drill
the screw holes, and the cable hole (optional)
according to the drill template on the ceiling.
Note:
Cable hole is required when adopting ceiling outlet
to route the cable.
4. Attach the mounting base to the ceiling, and secure
them with supplied screws
Figure 2-15 Attach the Mounting Base to the Ceiling
5. Route the cables through the cable hole (optional),
or the side opening.
Figure 2-13 Remove the Bubble
Figure 2-14 Drill Template
Snap Joint
2-Φ4.5
Φ98.0