HIKVISION TURBO HD DS-2CE56H0T-IT3F Kullanıcı Kılavuzu - Sayfa 10
Güvenlik Kamerası HIKVISION TURBO HD DS-2CE56H0T-IT3F için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. HIKVISION TURBO HD DS-2CE56H0T-IT3F 17 sayfaları. Turbo hd bullet & dome camera
Ayrıca HIKVISION TURBO HD DS-2CE56H0T-IT3F için: Kullanıcı Kılavuzu (16 sayfalar)
Sayfayı Yazdır
Figure 2-12 Disassemble the Camera
2. Pry the snap joint anticlockwise to remove the
bubble, and the black liner.
3. Attach the drill template (supplied) to the place
where you want to install the camera, and then drill
the screw holes, and the cable hole (optional)
according to the drill template on the ceiling.
Note:
Cable hole is required when adopting ceiling outlet
to route the cable.
4. Attach the mounting base to the ceiling, and secure
them with supplied screws
Figure 2-15 Attach the Mounting Base to the Ceiling
5. Route the cables through the cable hole (optional),
or the side opening.
Figure 2-13 Remove the Bubble
Figure 2-14 Drill Template
Snap Joint
2-Φ4.5
Φ98.0