Cerasonar Sub Series Installatie-instructies - Pagina 2

Blader online of download pdf Installatie-instructies voor {categorie_naam} Cerasonar Sub Series. Cerasonar Sub Series 2 pagina's.

cerasonar sub series

Check the construction for vibration

noise, make sure the cavity has

proper insulation. Prepare the wall

or ceiling to fit in the speaker.

Fill in plaster, we HIGHLY

recommand to use a fl exible

filler, e.g. Knauf Unifl ott or

Ardex 828

Strip the wire by 10 mm.

Connect the speaker cable

to the speaker, be aware of

the polarity

Use mesh tape in the

plastering process

Installation instructions

invisible subwoofer for all cerasonar speakers

Insert the speaker, make sure

there is no strain between the

underlying insulation and speaker.

Screw through all pre-drilled

holes. The heads of the screws

should penetrate about 1 mm into

the panel material.

ATTENTION: Test the speaker!

Up to 2mm of plaster can be ap-

plied, thus, Q3 and Q4 wall /ceiling

quality levels are easily possible.

ATTENTION: Before using the

speaker, let the plaster dry off More

information about the installation

process in our FAQ section.